Garden Products

Tool Racks

These are designed to take either T handle or D Handle garden or equestrian tools, such as spades and forks, if mounted high enough they can even be used to hang up hoes etc.

They are made in two sizes, the three hook version above and a two hook version shown below.

Sizes 3 hook 28” x 6” Code TR03 Price £14.30

Sizes 2 hook 17” x 6” Code TR02 Price £9.30

Ragwort Fork

This is a heavy duty ragwort fork which we have designed ourselves and has been tested by our friends who have a paddock full of Ragwort.

It has four 10mm tines which are 4” long and made in a pattern which holds and lifts the entire plant and root ball out in one go.

It has been tested on very hard dry stony ground and it performed admirably , the only time it was found to fail was when attempting to remove very small plants, but we also make a long handled multi weed tool which will remove these small weeds.

Dimensions width 7”, length 35”

Code RF01 Price £18.75

Multi weed Tool

This is a tool for removing smaller weeds than the ragwort fork, it is fitted to a 60” straight shaft and has four tines, they are 8mm diameter, with the outer two being 3” long and the inner ones 4” long, the tine spacing is reduced on this tool compared to the ragwort fork so the smaller weeds don’t pass through the gap, it has a levering pad on the back to help with weed removal.

Dimensions width 6”, length 64”

Code MW01 Price £13.50

Dutch Hoe

This is a variation in dutch hoe design, I personally have never seen this pattern for sale anywhere, I originally saw this type made from an old draw hoe that my Grandfather heated in his forge and basically straightened out the hook and reversed it to make a dutch hoe, having used this particular hoe for the last twenty or more years I have found it to be vastly superior to any of the 'A' frame type on the market as this has only the central rod to catch rubbish around, plus it will cut on the push and pull strokes, it all amounts to a tool that requires the minimum amount of effort to use.

It has a 6” x 2” blade which is hand forged, sharpened and polished, mounted onto a 1/2” steel swan neck which is then welded to the handle socket, it has a 60” wooden handle.

Code DH01 Price £13.00

Garden Line

Traditional garden line complete with 20 metres of woven nylon cord, the line holder revolves on the spike for easy rewinding. Finished in hammered silver gloss paint.

Code GL1 Price £11.50

Garden Seat / Potplant holder

This is another one of Mandy's ideas, it was originally built as a garden seat / stool, but once built it became clear it could just as well be used as a free standing pot plant holder.

Price is £35.00

Website designed by P.Sharman

All content copyright p.sharman 2009